Salton BL 1042 User Manual

SAL7-555 Booklet Blender Salton BL-1042 _EN VF.qxd 12/06/07 16:55 Page 1  
®
‘Lo-profile’  
die cast blender  
Instruction Booklet  
Model: BL-1042  
SAL7-555 Booklet Blender Salton BL-1042 _EN VF.qxd 12/06/07 16:55 Page 3  
POLARIZED PLUG  
This appliance has a polarized plug (one blade is wider than the other). To reduce  
the risk of electric shock, this plug will fit in a polarized outlet only one way. If the  
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact  
a qualified electrician. Do not modify the plug in any way.  
DESCRIPTION OF PARTS  
1. Filler Cap  
1
2. Lid  
2
3
3. Glass Jar  
4. Cutting Blade Assembly  
5. Jar Base  
6. Blender Base  
7. Coupler  
8. Control Panel  
a) Low/Stir  
b) Mix  
4
5
8 c  
6
c) Chop  
d) Puree  
e) Ice Crush  
f) Pulse  
8 a  
8 g  
8 f  
8 b  
8 d  
8 e  
g) Power  
7
BEFORE FIRST USE  
1. Read all instructions carefully and keep them for future reference.  
2. Remove all packaging.  
3. Remove the Jar Base & Cutting Blade Assembly (see the Care and  
Cleaning Section). Wash the Jar, Lid, Filler Cap, Jar Base, Gasket and  
Cutting Blade Assembly in warm soapy water. NOTE: Be careful when  
handling the Cutting Blade Assembly, the blades are sharp.  
4. Rinse, dry and reassemble.  
5. Wipe the Blender Base with a damp cloth. DO NOT IMMERSE  
THE BLENDER BASE IN WATER OR ANY OTHER LIQUID.  
3
SAL7-555 Booklet Blender Salton BL-1042 _EN VF.qxd 12/06/07 16:55 Page 4  
Speed Settings  
Low/Stir – for mixing food such as eggs to prepare mayonnaise, creams, salad  
dressings, etc.  
Mix – for mixing soft foods such like vegetable soups, baby food, purées, etc.  
Chop – for medium foods such as fruit milkshakes, etc.  
Puree – for hard foods such as apples, carrots, celery, bread, etc.  
Ice Crush – to crush ice (ideal to prepare crushed-ice drinks)  
Pulse – for quick bursts of power and to crush ice  
HOW TO USE  
1. Place the Blender Jar securely on the Blender Base by aligning the arrow on  
the Jar Base with the line on the front of the Coupler.  
IMPORTANT: The blender will not operate if the Blender Jar is not properly  
installed on the Coupler.  
2. Plug into a 120V AC wall outlet.  
3. Add ingredients and replace the Lid.  
4. Press the ‘Power’ button. The red ‘Power’ LED light will flash, indicating that  
the blender is turned on but no speed has been selected.  
5. Press the desired blending speed. The ‘Power indicator light will glow  
indicating the blender is functioning at the proper speed.  
6. To stop blending re-press the activated speed button. The blending process will  
stop. The red ‘Power’ light will continue to flash to let you know that the  
blender is still ‘On’ and can be reactivated by pushing the desired speed button.  
7. When finished blending, the blender can be completely deactivated and  
stopped by pushing the ‘Power’ button.  
8. Unplug from the wall outlet and remove the Blender Jar by lifting  
up – do not twist. NOTE: Wait until the Cutting Blades have stopped  
before removing the Blender Jar.  
IMPORTANT: This blender is equipped with an automatic safety switch that  
will turn off the blender after 1-1/2 minutes of continuous use. If the blender  
hasn’t been used for less than 10 minutes, it can be reactivated by pressing  
the desired blending option. If the blender hasn’t been used for more than  
10 minutes you will have to press the ‘Power’ button to reactivate  
the blender before pressing the desired blending option.  
4
SAL7-555 Booklet Blender Salton BL-1042 _EN VF.qxd 12/06/07 16:55 Page 5  
HELPFUL HINTS  
Prepare solid ingredients by cutting into small pieces 1” – 1-1/4”  
(2 – 3 cm). Add a small amount of liquid and place small portions into  
the Blender Jar instead of a large quantity all at once. Gradually add  
more liquid through the Filler Cap opening.  
Allow hot liquids to cool to a lukewarm temperature before processing.  
Always place your hand on top of the Lid when operating.  
When chopping nuts or other dry mixtures use 3/4 cup (180 ml) at a time,  
to ensure even chopping.  
While the motor is running, ingredients can be added through the Filler  
Cap opening in the center of the Blender Lid.  
To crush ice, place the ice cubes into the Jar with the motor switched off.  
Close the Lid and press the ‘ICE CRUSH’ setting. Add a little water through  
the Filler Cap opening for more even ice crushing.  
DO NOT operate the Blender for more than 90 seconds when processing  
dry ingredients.  
DO NOT run the Blender when empty  
CARE AND CLEANING  
1. Unplug from wall outlet.  
2. Remove Blender Jar from Blender Base. Wipe the Blender Base with a damp  
cloth. If necessary, you can use a little mild detergent. DO NOT IMMERSE  
IN WATER OR ANY OTHER LIQUID.  
3. Empty the Blender Jar completely. Rinse the inside with water, then remove  
the plastic Jar Base and Cutting Blade Assembly by turning the Jar Base  
counterclockwise.  
4. Remove the Cutting Blades and gasket. NOTE: Be careful when handling  
the Cutting Blade Assembly, the blades are sharp.  
5. Wash the Blender Jar, Lid, Filler Cap, Jar Base, Gasket and Cutting Blades  
in warm soapy water. Rinse and dry.  
5
SAL7-555 Booklet Blender Salton BL-1042 _EN VF.qxd 12/06/07 16:55 Page 6  
6. To reassemble, place the Gasket over the top of the Cutting Blades  
(BE CAREFUL AS THE BLADES ARE SHARP) and slide the Gasket to the  
bottom edge of the Cutting Blade assembly. Fit the Cutting Blades through  
the hole in the Blender Jar. Place the Jar Base over the bottom of the Jar  
and turn clockwise.  
RECIPES  
Raspberry Salad Dressing  
1/2 cup (125g)  
2 tbsp. (30 ml)  
2 tbsp. (30 ml)  
1 tsp. (5 ml)  
fresh or frozen raspberries, thawed  
vegetable oil  
Balsamic vinegar  
chopped mint  
2 tsp. (10 ml)  
sugar (add up to 1 tbsp. (15 ml) depending on sweetness  
of raspberries)  
Place raspberries into Blender Jar. Blend on Low/Stir speed until smooth.  
If desired, push through a sieve to remove seeds. Return raspberry puree  
to Blender Jar and add oil, vinegar, mint and sugar. Pulse until combined.  
Avocado Salad Dressing  
1 tbsp. (15 ml)  
3 tbsp. (45 ml)  
lemon juice  
plain yogurt  
1/2 cup (125 ml) sour cream  
1 tsp. (5 ml)  
1/2 tsp. (5 ml)  
1
honey  
crushed garlic  
avocado, peeled, stoned and chopped  
Add all ingredients to the Blender Jar. Low/Stir speed until smooth.  
6
SAL7-555 Booklet Blender Salton BL-1042 _EN VF.qxd 12/06/07 16:55 Page 7  
Crepes with Strawberry Sauce  
1-1/4 cups (310 ml) milk  
1 cup (250 ml)  
2
all purpose flour  
eggs  
1 tbsp. (15 ml)  
melted butter or margarine  
Place milk, flour eggs and butter in the Blender Jar. Blend on 1 (Mix) speed until  
smooth. Pour 1/4 cup (60 ml) batter into a non-stick frying pan and cook over  
a medium heat until golden brown. Turn and cook for 30 seconds longer.  
Remove from pan and keep warm. Repeat with remaining mixture.  
Strawberry Sauce  
1/2 lb. (225 g) strawberries, fresh or frozen  
1/4 cup (60 ml) icing sugar  
2 tbsp. (30 ml) Grand Marnier  
2 tbsp. (30 ml) water  
Place strawberries, icing sugar, Grand Marnier and water into the Blender Jar.  
Blend on 1 (Mix) speed until smooth. Pour over crepes. If desired, top with a few  
sliced strawberries, a dollop of whipped cream and sprinkle with icing sugar.  
Banana Shake  
2 cups (500 ml) milk  
2
bananas, peeled and cut in chunks  
1/4 cup (60 ml) yogurt  
1 tbsp. (15 ml) honey  
1 tsp. (5 ml)  
lemon juice  
1 cup (250 ml) ice cubes  
nutmeg - garnish  
Place milk, bananas, yogurt, honey, lemon juice and ice cubes in Blender Jar.  
Blend on ICE CRUSH speed until well combined and ice is crushed. If necessary,  
Pulse a few times to crush ice. Pour into glasses and sprinkle with nutmeg.  
7
SAL7-555 Booklet Blender Salton BL-1042 _EN VF.qxd 12/06/07 16:55 Page 8  
Strawberry Daiquiri  
2 tbsp. (30 ml) white rum  
1/4 cup (60 ml) lime juice  
1 tbsp. (15 ml) sugar  
2 cups (500 ml) strawberries  
2 cups (500 ml) ice cubes  
Place rum, lime juice, sugar, strawberries and ice cubes into Blender Jar.  
Pulse until ice is crushed and ingredients are combined. Pour into glasses.  
Margarita  
2 tbsp. (30 ml) Tequila  
2 tbsp.  
Triple Sec  
1 cup (250 ml) lime juice  
2 cups (500 ml) ice cubes  
Place tequila, Triple Sec, lime juice and ice cubes into Blender Jar. Pulse until  
ice is crushed and ingredients are combined. Pour into glasses.  
8
SAL7-555 Booklet Blender Salton BL-1042 _EN VF.qxd 12/06/07 16:55 Page 9  
A short supply cord is provided to reduce the hazards of becoming entangled in or  
tripping over a long cord. Extension cords may be used if care is exercised in their  
use. If an extension cord is used, the marked electrical rating of the detachable  
power-supply cord or extension cord should be at least as great as the electrical  
rating of the appliance. If the appliance is of the grounded type, the extension  
cord should be a grounded 3-wire cord. The extension cord should be arranged so  
that it will not drape over the counter top or table top, where it can be pulled on  
by children or tripped over.  
LIMITED WARRANTY  
Salton Canada warrants that this appliance shall be free from defects in material  
and workmanship for a period of one year from the date of purchase. During this  
‘in-warranty’ period, defective products will be repaired or replaced at the discretion  
of the retailer and/or Salton Canada. This warranty covers normal domestic usage  
and does not cover damage which occurs in shipment or failure which results from  
alteration, accident, misuse, abuse, glass breakage, neglect, commercial use or  
improper maintenance.  
A defective product should be returned to the original place of purchase within the  
retailer’s stipulated return/exchange period*. If you are unable to have a defective  
product replaced under warranty by the retailer, please check our website at  
assistance by mail, e-mail, fax or telephone as listed below.  
To ensure prompt ‘in-warranty’ service securely package and return the product to  
us prepaid. Be sure to include the original proof of purchase and a description of the  
defect along with your address and postal code.  
For repairs not covered by the warranty, please contact us for assistance.  
®
SALTON CANADA  
Customer Service Department  
81A Brunswick  
Dollard-des-Ormeaux  
Quebec, Canada H9B 2J5  
Fax: 514-685-8300  
Tel: 514-685-3660  
* Return/exchange policies at each retailer vary and may differ from the Salton Canada 1 year limited  
warranty period.  
9

Whistler BT2300 User Manual
Ulead KDC330 User Manual
Tiffen Davis & Sanford FZ10 3 User Manual
Sony XR C5200 User Manual
Sony LINEAR PCM RECORDER PCM M10 User Manual
Sony Handycam DCR DVD850 User Manual
Sony Ericsson Bluetooth HBH PV720 User Manual
Sony DH1730 User Manual
Sony Camcorder DCR PC10 User Manual
Samsung SCL770 User Manual