VT3210LED/VT4210LED
LED TV
- User Guide
- Guide de l’utilisateur
- Guida dell’utente
Model No. : VS13772-1M
VS13776-1M
No Signal Power Down.......................................................................................... 24
Using the OSD Menu............................................................................................. 25
Customizing the Picture Settings........................................................................... 25
Customizing the Audio Settings ............................................................................. 27
Customizing the Preferences Settings................................................................... 29
Customizing the Locks Settings............................................................................. 30
Customizing the Setup Settings............................................................................. 32
Cleaning the LED TV.........................................................................................34
Disclaimer .............................................................................................................. 34
Troubleshooting................................................................................................35
Specifications....................................................................................................38
Limited Warranty...............................................................................................41
Mexico Limited Warranty..................................................................................42
ViewSonic
VT3210LED/VT4210LED
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment
Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste,
but use the return and collection systems according to local law.
If the batteries, accumulators and button cells included with this equipment, display the chemical
symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than
0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
ENERGY STAR Information:
To ensure your television is operating at optimal energy efficiency, select [Home] mode during initial
activation.
To return to [Home] mode settings, select [Standard] picture mode. [Standard] mode is recommended for
normal home use.
Keeping the TV at its factory default settings that meet ENERGY STAR criteria.
Enabling certain features and functionality of LED TV will increase its energy consumption, possibly beyond
the limits required for ENERGY STAR qualification.
ViewSonic
VT3210LED/VT4210LED
i
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European
Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic
equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the
European Technical Adaptation Committee (TAC) as shown below:
Proposed Maximum
Substance
Actual Concentration
Concentration
Lead (Pb)
0.1%
0.1%
0.01%
0.1%
0.1%
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Mercury (Hg)
Cadmium (Cd)
6+
Hexavalent Chromium (Cr
)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Certain components of products as stated above are exempted under the Annex of the RoHS Directives as
noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically
mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts
(e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to
0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
ViewSonic
VT3210LED/VT4210LED
ii
Copyright Information
Copyright © ViewSonic® Corporation, 2010. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product meets the ENERGY
STAR® guidelines for energy efficiency.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained
herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance
or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change
product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without
prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes available, please
For Your Records
VT3210LED/VT4210LED
Product Name:
ViewSonic LED TV
Model Number:
Document Number:
VS13772 (VT3210LED-1M) /VS13776 (VT4210LED-1M)
VT3210LED-1M_UG_ENG Rev. 1A 10-04-10
VT4210LED-1M_UG_ENG Rev. 1A 10-04-10
_________________________________
_________________________________
Serial Number:
Purchase Date:
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank you for being part
of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
ViewSonic
VT3210LED/VT4210LED
iii
TV Wall Mount
call our service team: United States 1-800-688-6688, Canada 1-866-463-4775.
Safety Instructions
The symbol is intended to alert the user to presence of un-insulated “Hazardous
Voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
This symbol is intended to alert the user that improper use of the product may
result in product malfunction. The user should pay attention to avoid accidents or
unnecessary problems.
Wet Location
Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Outdoor Use
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
Disconnect Device - The Mains Plug or An Appliance
Coupler
The mains plug or an appliance coupler is used as the disconnect device for disconnection from
the mains, the disconnect device shall remain readily operable.
ViewSonic
VT3210LED/VT4210LED
iv
FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This device generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications.
WARNING
Do not expose this TV to rain or moisture.
It may increase the risk to fire or
electronic shock.
Installation
• The TV should be installed near an
easily accessible power outlet.
• To prevent internal heat buildup, do not
block the ventilation openings.
• Do not install the TV in a hot or humid
place, or in a place subject to excessive
dust or mechanical vibration.
• Avoid operating the TV at
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
temperatures below 41ºF (5ºC).
• When the TV is transported directly
from a cold to a warm location, or
if the room temperature changes
suddenly, the picture may be blurred
or show poor color due to moisture
condensation. In this case, please wait
a few hours before turning on the TV,
in order to let the moisture evaporate
first.
Dangerous Voltage:
The lightning flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user to
the presence of dangerous
voltage within the inside
of the product that may be
sufficient level to constitute
a risk of electric shock to
persons.
• Reorient or relocate the receiving
antenna.
• To ensure best picture quality, do not
expose the screen to direct illumination
or sunlight. We recommend you use
spot lighting directed down from the
ceiling or to cover the windows that
face the screen with opaque curtains. It
is better that TV is installed where the
floor and walls are not of a reflective
material.
• Increase the separation between the
device and receiver.
• Connect the device into an outlet on a
circuit different from that to which the
receiver is connected.
Instruction: The
exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and servicing
instructions in the literature
accompanying the appliance.
• Consult the dealer or an experienced
radio/TV technician for help.
Pursuant to FCC regulations, be
cautioned that any changes or
modifications not expressly approved in
this manual could void your authority
to operate this equipment.
TO CUSTOMERS
To install the specified TV, sufficient
expertise is required. Make sure you
subcontract the installation to ViewSonic
dealer or licensed contractors and
pay adequate attention to safety during
the installation.
The TV shall not be exposed to dripping
or splashing. Do not put objects filled
with liquids, such as vases, on the TV.
SAFETY
CAUTION
• Operate the TV on 120V AC only.
• Use the AC power cord specified by
ViewSonic and suitable for the voltage
where you use it.
To prevent electric shock, do not use
this polarized AC plug with an extension
cord, receptacle or other outlet unless the
blades can be fully inserted to prevent
blade exposure.
Note
This television includes a QAM
demodulator, which should allow you
to receive unscrambled digital cable
television programming via subscription
service to a cable service provider.
The type of programming and signal
provided by your cable service provider
will affect the availability of digital cable
television programming in your area.
• The plug is designed, for safety
purposes, to fit into the wall outlet only
one way.
Declaration of Conformity
Trade Name: ViewSonic Model:
• If you are unable to insert the plug
fully into the outlet, contact your
dealer.
VT3210LED / VT4210LED Responsible
Party: ViewSonic Corporation Address: 381
Brea Canyon Road, Walnut, CA. 91789 USA
Telephone Number: 1-800-688- 6688 This
device complies with part 15 of the FCC
rules. Operation is subject to the following
two conditions: 1) This device may not cause
harmful interference, and 2) this device must
accept any interference received, including
interference that may cause undesired operation.
• If any liquid or solid object should
fall inside the cabinet, stop operating,
unplug the TV immediately and
have it checked by qualified service
technician.
TRADEMARK
INFORMATION
• Macintosh is a trademark of Apple
Manufactured under license from
Dolby Laboratories.
• If you will not be using the TV for a
long time, disconnect the power by
pulling the plug itself. Do not pull on
the cord.
Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
• HDMI, the HDMI logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC in the United
States and other countries.
• For details concerning safety
precautions, refer to Important Safety
instructions on page 3.
NOTIFICATION
This device has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
ViewSonic
VT3210LED/VT4210LED
v
|